Help - BT Studio User Manual

Help

The batteries may be flat or dead.
Recharge or replace the batteries.
Is the telephone line cord plugged into the phone socket?
Check that the base station is connected to the mains power
and switched on.
Is the display flashing icon?
The mains power cable may not be connected at the base or
switched on.
Are you in range of the base station?
Move closer to the base station.
The batteries could be low or flat
Recharge or replace the batteries.
The ringer volume may be set too low for you. To adjust
the volume, see page 25.
Check that the base station is plugged into the phone socket
and the mains power and that the mains power is switched on.
Sometimes your BT Studio can interfere with other
electrical equipment if it is placed too close.
It is recommended that you place your BT Studio at least
one metre away from such appliances to avoid any risk of
interference.
28