Settings/Basic Settings Page - Grandstream Networks GXP1160 User Manual

Small-medium business ip phone
Hide thumbs Also See for GXP1160:
Table of Contents

Advertisement

Conference URI
DND Call Feature On
DND Call Feature Off
Use Privacy Header
Use P-Preferred-Identity
Header
Special Feature

SETTINGS/BASIC SETTINGS PAGE

End User Password
Confirm Password
Internet Protocol
IPv4 Address Type
DHCP Host name (Option 12)
DHCP Vendor Class ID
(Option 60)
FIRMWARE VERSION 1.0.5.2
setting is "Medium".
Configures the conference URI when using Broadsoft N-way calling
feature.
Configures DND feature code to turn on DND.
Configures DND feature code to turn off DND.
Controls whether the Privacy Header will present in the SIP INVITE
message or not. The default setting is "default", which is when "Huawei
IMS" special feature is on, the Privacy Header will not show in INVITE. If
set to "Yes", the Privacy Header will always show in INVITE. If set to
"No", the Privacy Header will not show in INVITE.
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which is when
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will
not show in INVITE. If set to "Yes", the P-Preferred-Identity Header will
always show in INVITE. If set to "No", the P-Preferred-Identity Header
will not show in INVITE.
Different soft switch vendors have special requirements. Therefore users
may need select special features to meet these requirements. Users can
choose from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro
or Huawei IMS depending on the server type. The default setting is
"Standard".
Allows the administrator to set the password for user-level web GUI
access. This field is case sensitive with a maximum length of 30
characters.
Confirms the end user password field to be the same as above.
Selects Prefer IPv4 or Prefer IPv6.
Allows users to configure the appropriate network settings on the phone
to obtain IPv4 address. Users could select "DHCP", "Static IP" or
"PPPoE". By default, it is set to "DHCP".
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
GXP1160/GXP1165 USER MANUAL
Page 39 of 59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gxp1165Gxp116 series

Table of Contents