Making Calls Using Ip Addresses - Grandstream Networks GXP1160 User Manual

 Press SEND key
•
Via Phonebook. Dial the number from the phonebook.
 Press MENU button to bring up the main menu;
 Select and enter Phonebook;
 Select the phonebook entry you would like to call using the navigation "UP" and "DOWN" arrow
keys;
 Press SEND key
•
Via Page/Intercom.
 Take handset off hook; or
Press Speaker button; or
Press Headset softkey with headset plugged in;
 You shall hear dial tone after off hook;
 Press MENU button to switch the call screen from "Line x: Caller DIAL" to "Line x: Caller Paging";
 Enter the number;
 Press SEND key
Note:
•
After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds,
configurable via Web GUI) before dialing out. Press SEND key
Key Entry Timeout;
•
If digits have been entered after handset is off hook, the SEND key will works as SEND instead of
REDIAL;
•
By default, # can be used as SEND to dial the number out. Users could disable it by setting "Use # as
Dial Key" to "No" from Web GUI->Account page;
•
For Paging/Intercom, if the SIP Server/PBX supports the feature and has Paging/Intercom feature
code set up already, users might not necessarily need toggle to paging mode in the call screen on
GXP1160/GXP1165. Simply dial the feature code with extension as a normal call.

MAKING CALLS USING IP ADDRESSES

Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls
FIRMWARE VERSION 1.0.5.2
to dial out.
to dial out.
or # to dial out.
GXP1160/GXP1165 USER MANUAL
or # key to override the No
Page 17 of 59