Grandstream Networks GXP2120 User Manual User Manual page 64

to override SIP Server
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Authenticate Conf File
Maintenance -> Syslog
Syslog Server
Syslog Level
Send SIP Log
Auto Recover From
Abnormal
Maintenance -> Language
Display Language
Language File Postfix
Maintenance -> TR-069
Enable TR-069
ACS URL
TR-069 Username
TR-069 Password
Periodic Inform Enable
FIRMWARE VERSION 1.0.5.24
phone. The default setting is "No".
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Authenticates configuration file before acceptance. The default setting is "No".
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There are
4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:

product model/version on boot up (INFO level);

NAT related info (INFO level);

sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

inbound and outbound calls (INFO level);

registration status change (INFO level);

negotiated codec (INFO level);

ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages or not.
The default setting is "No".
Configures whether auto recover or not when the phone is running abnormal.
The default setting is "Yes".
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
Enables TR-069. The default setting is "No".
URL for TR-069 Auto Configuration Servers (ACS).
ACS username for TR-069.
ACS password for TR-069.
Enables periodic inform. If set to "Yes", device will send inform packets to the
ACS. The default setting is "No".
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 64 of 77