Grandstream Networks GXP2120 User Manual User Manual page 47

Use Privacy Header
Use P-Preferred-Identity
Header
Account x -> SIP Settings -> Advanced Features
Broadsoft Call Center
Hoteling Event
Call Center Status
Publish to Call Center
Feature Key
Synchronization
Line Seize Timeout
Eventlist BLF URI
Conference URI
Music On Hold URI
BLF Call-pickup Prefix
FIRMWARE VERSION 1.0.5.24
setting is "Auto".
Controls whether the Privacy Header will present in the SIP INVITE message
or not. The default setting is "default", which is when "Huawei IMS" special
feature is on, the Privacy Header will not show in INVITE. If set to "Yes", the
Privacy Header will always show in INVITE. If set to "No", the Privacy Header
will not show in INVITE.
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message or not. The default setting is "default", which is when
"Huawei IMS" special feature is on, the P-Preferred-Identity Header will not
show in INVITE. If set to "Yes", the P-Preferred-Identity Header will always
show in INVITE. If set to "No", the P-Preferred-Identity Header will not show in
INVITE.
When set to "Yes", Feature Key Synchronization will be enabled regardless of
web settings. The default setting is "No".
Enables Broadsoft Hoteling event feature. The default setting is "No".
When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call
center status. The default setting is "No".
When set to "Yes", users could select "Away", "Online" or "Busy" from LCD
menu and publish it to call center. The default setting is "No".
This feature is used for Broadsoft call feature synchronization. When it's
enabled, DND and Call Forward features can be synchronized with Broadsoft
server. The default setting is "Disabled".
Defines the interval (in seconds) before the line can be seized when Shared
Line is used. The default value is 15 seconds.
Configures the eventlist BLF URI on the phone to monitor the extensions in the
list with Multi Purpose Key. If the server supports this feature, users need to
configure an eventlist
BLF1006@myserver.com) with a list of extension included. On the phone, in
this "eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To monitor the
GUI->Settings->Programmable Keys page, please select "eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
Configures the conference URI when using Broadsoft N-way calling feature.
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
Configures the prefix prepended to the BLF extension when the phone picks
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL
BLF URI on the
extensions in the
service side first (i.e.,
list, under Web
Page 47 of 77