Grandstream Networks GXP2120 User Manual User Manual page 57

Date Display Format
Time Display Format
Settings -> Web Service
Enable Weather Update
City Code
Update Interval
Degree Unit
Enable Stock Update
Stock Code
Enable Currency Update
FIRMWARE VERSION 1.0.5.24
April to the 1st Sunday of November.
Configures the date display format on the LCD. The following formats are
supported:

yyyy-mm-dd: 2012-07-02

mm-dd-yyyy: 07-02-2012

dd-mm-yyyy: 02-07-2012

dddd, MMMM dd: Friday, October 12

MMMM dd, dddd: October 12, Friday
Configures the time display in 12-hour or 24-hour format on the LCD. The
default setting is in 12-hour format.
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Specifies the degree unit for the weather information to display on the
phone.
Configures to enable or disable stock update on the phone. The default
setting is "Yes". If set to "No", the stock information screen will not show.
Note:
This option is not applicable to GXP14xx.
Configures stock code for the phone to look up and display the stock
information.
Note:
This option is not applicable to GXP14xx.
Configures to enable or disable currency update on the phone. The
default setting is "Yes". If set to "No", the currency information screen will
not show.
Note:
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 57 of 77