Adapter Port; Internet Radio - Pioneer VSX-1020-K Operating Insructions

Additional information

ADAPTER PORT

Symptom
The Bluetooth wireless
technology device cannot
be connected or operated.
Sound from the Bluetooth
wireless technology device
is not emitted or the sound
is interrupted.

Internet radio

Symptoms
Cannot access the
network. ("Connection
Error" shows in the
display.)
Cannot listen to Internet
radio stations.
("Connection Error"
shows in the display.)
Remedy
• Check that no object that emits electromagnetic waves in the 2.4 GHz
band (microwave oven, wireless LAN device or Bluetooth wireless
technology apparatus) is near the unit. If such an object is near the unit,
set the unit far from it. Or, stop using the object emitting the
electromagnetic waves.
• Check that the Bluetooth wireless technology device is not too far from
the unit and that obstructions are not set between the Bluetooth wireless
technology device and the unit. Set the Bluetooth wireless technology
device and the unit so that the distance between them is less than about
10 m and no obstructions exist between them.
• Check that the Bluetooth ADAPTER and the ADAPTER PORT of the unit
are correctly connected.
• The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless technology.
Check the setting of the Bluetooth wireless technology device.
• Check that pairing is correct. The pairing setting was deleted from this
unit or the Bluetooth wireless technology device. Reset the pairing.
• Check that the profile is correct. Use a Bluetooth wireless technology
device that supports A2DP profile and AVRCP profile.
Causes
The LAN cable is not firmly
connected.
The router is not switched on.
The network device was switched on
when this receiver was already on.
The firewall settings for components
on the network are currently in
operation.
You are currently disconnected from
the Internet.
The URL for the Internet radio
station is incorrectly programmed.
The broadcasts from an Internet radio
station are stopped or interrupted.
An Internet radio station is selected
whose protocol this receiver does
not recognize.
An Internet radio station had closed
or moved.
Remedies
Firmly connect the LAN cable (page 34).
Switch on the router.
Switch the network device on before the
receiver.
Check the firewall settings for components
on the network.
Check the connection settings for
components on the network, and consult
with your network service provider if
necessary (page 104).
Check that the URL was correctly entered
when programming.
Broadcasts may be interrupted or
suspended by the radio station.
This receiver does not recognize protocols
other than 'http' and 'mms'.
Enter new internet radio station on the
Internet Radio Setup.
12
119
En