Listening To Music Contents Of A Bluetooth Wireless Technology Device With Your System - Pioneer VSX-1020-K Operating Insructions

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-1020-K:
Table of Contents

Advertisement

Available languages

Available languages

05
Basic playback
4
Select 'Pairing Bluetooth Device', then
press ENTER.
5
Select the 'Passcode' setting you want.
Select the same passcode as the Bluetooth
wireless technology device you wish to
connect.
• 0000/1234/8888 – Select the passcode
from these options. These are the
passcodes that can be used in most cases.
• Others – Select to use a passcode other
than those mentioned above.
6
If you selected Others in step 5, enter the
passcode.
Use / to select a number and / to
move the cursor.
7
Follow the instructions displayed on the
GUI screen to conduct pairing with the
Bluetooth
wireless technology device.
Switch on the Bluetooth wireless technology
device that you want to make pair, place it near
the receiver and set it to the pairing mode.
8
Check to see that the Bluetooth ADAPTER
is detected by the Bluetooth wireless
technology device.
When the Bluetooth wireless technology device
is connected:
CONNECTED appears in the receiver display.
When the Bluetooth wireless technology device
is not connected:
Go back to the passcode setting in step 5. In
this case, perform the connection operation
from the Bluetooth wireless technology device.
9
From the Bluetooth wireless technology
device list, select Bluetooth ADAPTER and
enter the Passcode selected in step 5.
Note
1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
2 The passcode may in some cases be referred to as "passkey" or PIN code.
3 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER
PORT input is selected.
4 • Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the
remote control buttons.
54
En
Listening to music contents of a
Bluetooth wireless technology
device with your system
1
Press ADAPTER on the remote control to
switch the receiver to ADAPTER PORT input.
2
Perform the connection operation from
the side of the Bluetooth wireless technology
device to the Bluetooth ADAPTER.
3
Start playback of music contents stored
on the Bluetooth wireless technology device.
This receiver's remote control buttons can be
used for basic playback of files stored on
Bluetooth wireless technology devices.
The Bluetooth
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
1
2
PGM
MENU
HDD
DVD
PHASE CTRL
STATUS
TV / DTV
MPX
PQLS
S.RETRIEVER
MIDNIGHT
AUDIO
1
2
3
®
word mark and logos are
3
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-920-kVsx-1025-k

Table of Contents