Connecting Other Audio Components; About The Wma9 Pro Decoder - Pioneer VSX-1020-K Operating Insructions

03 Connecting your equipment
Connecting other audio
components
This receiver has both digital and analog
inputs, allowing you to connect audio
components for playback.
One of these inputs have corresponding outputs
for use with analog audio recorders.
VSX-1020/VSX-1025
LAN
IN 4 OUT
( 10/100 )
TV/SAT VIDEO CD
IN IN IN OUT
R
CONTROL
IN OUT
REC
R L
AUDIO IN
CD-R, MD, DAT, etc.
• If the connection was made using an
optical cable, you'll need to tell the receiver
which digital input you connected the
component to (see The Input Setup menu
on page 42).
Note
1 • Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• With WMA9 Pro, sound problems may occur depending on your computer system. Note that WMA9 Pro 96 kHz
sources will be downsampled to 48 kHz.
30
En
COAXIAL OPTICAL
ASSIGNABLE
IN 1 IN 2 ASSIGNABLE
IN 1 IN 2
ADAPTER PORT
( OUTPUT 5 V 100 mA MAX )
( DVD ) ( CD ) ( TV/SAT ) ( DVR/BDR )
PRE OUT
ANTENNA
CD-R/TAPE SUBWOOFER
IN
AM LOOP FM UNBAL 75
FRONT CENTER SURROUND SURROUND
L R L R
A
SPEAKERS
COAXIAL OPTICAL
ANALOG
R L
AUDIO OUT
DIGITAL OUT
Select one
• If your turntable has line-level outputs (i.e.,
it has a built-in phono pre-amp), connect it
to the CD inputs instead.
• If you're connecting a recorder, connect
the analog audio outputs to the analog
audio inputs on the recorder.

About the WMA9 Pro decoder

This unit has an on-board Windows Media™
1
Audio 9 Professional
it is possible to playback WMA9 Pro-encoded
audio using HDMI, coaxial or optical digital
connection when connected to a WMA9 Pro-
compatible player. However, the connected
DVD player, set-top box, etc. must be able to
output WMA9 Pro format audio signals
through a coaxial or optical digital output.
(WMA9 Pro) decoder, so