Hdmi Setup - Pioneer VSX-1020-K Operating Insructions

07 Control with HDMI function

HDMI Setup

You must adjust the settings of this receiver as
well as the connected Control with HDMI-
compatible components in order to make use
of the Control with HDMI function. For more
information see the operating instructions for
each component.
1 Press RECEIVER
2 Select 'System Setup', then press ENTER.
3 Select 'Other Setup', then press ENTER.
4e.Other Setup
1. HDMI Setup
2. Volume Setup
3. Remote Control Mode Setup
4. Flicker Reduction Setup
5. Pairing Bluetooth Device
Control
Control mode
Exit Display Power Off :
Exit
4 Select 'HDMI Setup', then press ENTER.
5 Select the 'Control' setting you want.
Choose whether to set this unit's Control with
HDMI function ON or OFF. You will need to set
it to ON to use the Control with HDMI
function.
When using a component that does not
support the Control with HDMI function, set
this to OFF.
• ON – Enables the Control with HDMI
function. When this unit's power is turned
off and you have a supported source begin
playback while using the Control with
HDMI function, the audio and video
outputs from the HDMI connection are
output from the TV.
• OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used.
When this unit's power is turned off, audio
and video of sources connected via HDMI
are not output.
64
En
, then press Home Menu.
A/V RECEIVER
4e1.HDMI Setup
A/V RECEIVER
: ON
: ALL
YES Return
Finish
6 Select the 'Control Mode' setting you
want.
Choose whether you want to enable HDMI
for all linked functions or the PQLS function
only. However, Display Power Off will
activate the settings set forth in step 7 below.
• ALL – Enabled for all linked functions.
• PQLS – Enabled only for the PQLS
function. When PQLS is selected, link
functions other than the PQLS function
may not work properly. If you wish to use
all link functions, select ALL.
7 Select the 'Display Power Off' setting
you want.
If the TV's power is turned off while using the
Control with HDMI function, the receiver's
power is also turned off (all power off
function). This function can be disabled.
• YES – The all power off function is enabled.
The receiver's power turns off together with
the TV's power.
This function only works when the input
for a component connected to the
receiver by Control with HDMI is
selected or when watching the TV.
• NO – The all power off function is disabled.
The receiver's power is not affected when
the TV's power is turned off.
8 When you're finished, press HOME MENU.
You will return to the Home Menu.