For The Installation Engineer; Warnings; Installation; Technical Specifications - Electrolux EWT 1058 Instruction Manual

For the installation
engineer

Warnings

Installation

• This appliance is heavy. Take care when moving it.
• The transit bolts must be removed before use. Failure
to remove the protection devices for transport may
damage the appliance or neighbouring furniture. The
appliance must be unplugged when removing the tran-
sit bolts.
• Ensure a qualified plumber carries out the necessary
plumbing work to install the appliance.
• If the electricity supply to your home requires modifying
in order to connect your appliance, contact a qualified
electrician.

Technical specifications

DIMENSIONS
VOLTAGE / FREQUENCY
TOTAL POWER
FUSE RATING
WATER PRESSURE
SPIN SPEED
Power consumption (coloureds 60°C wash)
for an uniform load of 5,0 kg of mixed cotton
This appliance complies with EEC directive 89-336 relating to electromagnetic compatibility and to directive
EEC 73-23 relating to electrical safety.
Height
Width
Depth
minimum
maximum
cotton / mixed cotton
synthetics / wool
delicates
• Before connecting your appliance, carefully read the
instructions given in the "Electrical connection" sec
tion.
• After having installed the appliance, ensure that it is
not resting on the power lead.
• When the machine is installed on carpeted floor, ensure
that the carpet does not obstruct the ventilation
openings located on the underside of the appliance.
• The power lead must only be replaced by the After-
Sales Service.
850 mm
397 mm
600 mm
230 V / 50 Hz
2300 W
10 A
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
500 / 700 / 900 / 1000 rpm
/ 500 / 700 / 900 rpm
/ 500 / 700 rpm
0,95 kWh
22