Control Panel; Description Of Controls - Electrolux EWT 1058 Instruction Manual

Control panel

1. Programme selector
It is used to select the most suitable programme to the
type and soiling of your laundry as well as the tempe-
rature of the washing.
This dial is divided into two sectors:
- wash programmes:
whites, coloureds, synthetics, delicates, wool and
handwash ( ),
- additional programmes and stop function.
This programme selector can be turned to the left or to
the right.
5°
At the end of the programme, the selector should be
on the stop position "On/Off".
Symbols on the programme selector:
- E = energy saving programme,
- = cold,
- = handwash programme.
1 2 3 4 5 6
Options buttons
The various options should be chosen after the
programme has been displayed and before pressing
the Start/Pause button.
The corresponding lights illuminate when these buttons
are pressed. When pressed again, the lights extinguish.
They flash for approximately 3 seconds and the word
"Err" appears on the display window to warn of a selec-
tion error.
2. Prewash button
The appliance performs a prewash at 30°C max.
The prewash ends with a short spin for the whites,
coloureds and synthetics programmes and drains the
water for delicates. It is not possible to select the
prewash option for the wool and handwash programmes.
This option is recommended for heavily soiled laundry.
3. Spin button
When selecting the programme, a maximum speed
(corresponding to the type of laundry) is displayed.
However, by pressing the Spin button, this speed can be
reduced or the "no spin" option " " (drain) can be
selected depending on your drying options.
Spinning speeds depend on the type of laundry. The
following speeds can be selected:
• Whites / Coloureds:
500/700/900 and 1000 rpm.
• Synthetics / Wool / Handwash:
/500/700 and 900 rpm.
• Delicates:
/500 and 700 rpm.
7
8
7 9 10