Installation - Electrolux EW6F6448M5 User Manual

Table of Contents

Advertisement

Level of protection against ingress of solid particles and moisture ensured
by the protective cover, except where the low voltage equipment has no
protection against moisture
Water supply pressure
1)
Water supply
Maximum Load
Spin Speed
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.

5. INSTALLATION

WARNING!
Refer to Safety chapters.
5.1 Unpacking
1. Open the door. Remove all the items from
the drum.
Accessories delivered with the
appliance may vary depending on the
model.
2. Put the packaging element on the floor
behind the appliance and carefully put it
down onto its rear side. Remove the
8
ENGLISH
Minimum
Maximum
Cotton
Maximum spin speed
Do not lay washing machine on its
front.
3. Put the appliance back into an upright
It is possible to see water flowing
from the drain hose. This is because
the washing machine has been
tested at the factory.
IPX4
0.5 bar (0.05 MPa)
10 bar (1.0 MPa)
Cold water
8 kg
1351 rpm
polystyrene protection from the bottom.
CAUTION!
position. Remove the power supply cable
and the drain hose from the hose holders.
WARNING!
1
2

Advertisement

Table of Contents
loading

Table of Contents