Selecting The Desired Option; Selecting The Delay Start; Starting The Programme; Modifying The Programme In Progress - Electrolux EWT 1058 Instruction Manual

8. Selecting delay start
Before starting the programme, if you want to delay it,
press this button until the desired delay start is dis-
played; this appears in the display window (24 hours
maximum).

9. Starting the programme

Press the Start/Pause button: the corresponding light
stops flashing and only the lights of the phase currently
being performed and the light of the Start/Pause button
remain illuminated.
If a delay start has been selected, the appliance starts
the timer.
The time remaining window displays the duration of the
programme or the delay start.
10. Modifying the programme in
progress
Before any modifications, the appliance must be switched
to PAUSE by pressing the Start/Pause button. If you
want to change the programme, the current one must be
cancelled first by turning the programme selector to the
stop position "On/Off". Then select the new programme
and press the Start/Pause button again.
11. Interrupting a programme in
progress
Press the Start/Pause button: the corresponding light
flashes during the pause period. Press this same button
again to continue the programme.

12. Opening the lid

- Opening the lid during the cycle:
The lid can be opened (after pressing the start/pause
button) throughout all wash phases when the tempera-
ture of the washing water is below 40°C; the immediate
opening light "Door" is then illuminated.
- Opening the lid at the end of the cycle:
The immediate opening of the lid is signalled by a double
"click" of the locking device. The immediate opening
light "Door" is extinguished and only the drum in upper
position light "DSP" remains illuminated.

13. Cancelling a programme

Turn the programme selector dial to the stop position
"On/Off".

14. End of programme

The appliance stops automatically.
If the "Water in the tub" option has been selected, the
light of the Start/Pause button flashes indicating that the
water must be drained before opening the lid (see page
8: "Water in the tub" button).
Turn the programme selector dial to the stop position
"On/Off".
Remove the laundry.
Unplug the appliance and switch off the water inlet tap.
Check that the drum is empty: any garments left in the
machine may be damaged during the next wash (shrink-
age) or their colour may run onto other garments.
Note:
We recommend that the lid and drum are left open after
use to air the tub.
12