Tuner Setting - Kenwood DPX405BT Manual

DPX405BT/DPX305U

8-6. Tuner setting

You can set up the tuner.
1. Select the Tuner source.
Refer to <Source
2. Press and hold the [AUDIO] button.
Enter the Function setting mode.
3. Use the [Control knob] to select "SETTINGS".
For how to use the [Control knob], refer to
4. Use the [Control knob] to select a Tuner setting item
Display
"LOCAL
SEEK"
"SEEK
MODE"
"MONO
SET"
"TI"
"NEWS SET"
"AF SET"
"REGIONAL"
"AUTO TP
SEEK"
(Colored
5. Use the [Control knob] to select a setting.
The previous item appears.
Exit the Function setting mode.
Press and hold the [
8. Listen to the tuner
selection>.
Description
Only stations whose reception is good are searched in auto seek tuning.
"ON" / "OFF"
Sets the tuning mode.
"AUTO1": Automatic search for a station.
"AUTO2": Search in order of the stations in the preset memory.
"MANUAL": Normal manual tuning.
You can reduce the noise when stereo broadcasts are received as
monaural.
"ON" / "OFF"
Switches to the traffic information automatically when the traffic bulletin
starts.
"ON" / "OFF"
Turns ON/OFF the News Bulletin Automatic Reception function and sets
the news bulletin interrupt disabled time.
"OFF"/ "00M" – "90M"
When station reception is poor, automatically switches to the station that is
broadcasting the same program over the same Radio Data System network.
(AF: Alternative Frequency)
"ON" / "OFF"
Sets whether to switch to the station only in the specific region using the
"AF" control.
"ON" / "OFF"
When traffic information station reception is poor, automatically searches
for a station that can be received better.
"ON" / "OFF"
text: Factory setting)
] button.
8-6. Tuner setting
<3-3. How to select the item>.