Tuner Operation; Basic Operation; Tuner Setting; Auto Memory Entry - Kenwood DPX308U Quick Start Manual

Tuner Operation

SRC
BAND 4 ¢

Basic Operation

Selecting Tuner source
Press the [SRC] button.
Select the "TUNER" display.
Selecting the Receiving Band
Press the [BAND] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [4] or [¢] button.
✍ Details of the station selecting in operation are
set in the "SEEK MODE"
20).
20
|
DPX308U
1 – 6
VOL
of <Tuner Setting> (page

Tuner Setting

You can select the following Tuner Setting items.
1
Select Tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the desired
item is displayed.
Select "SETTINGS".
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the desired
item is displayed.
Display Overview
"SETTINGS"
"SEEK MODE" Selects the tuning mode of the radio.
"AUTO1": Automatic search for a station.
"AUTO2": Search in order of the stations in the
Preset memory.
"MANUAL": Normal manual tuning control.
"AUTO MEMORY" Memorizes 6 stations with good reception
automatically.
Refer to <Auto Memory Entry> (page
"FORCED MONO" Reduces the noise when stereo broadcasts are
received as monaural.
"ON"/ "OFF"
5
Make a setting
Turn the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
Remarks
• FORCED MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
21).
( : Factory setting)