Initial Settings - Kenwood DPX405BT Manual

DPX405BT/DPX305U

11-6. Initial settings

You can configure initial settings of this unit.
1. Select the Standby source.
Refer to <Source
2. Press and hold the [AUDIO] button.
Enter the Function setting mode.
3. Use the [Control knob] to select "INITIAL SET".
For how to use the [Control knob], refer to
4. Use the [Control knob] to select an Initial setting item.
Display
"PRESET
TYPE"
"KEY
BEEP"
"RUSSIAN
SET"
"P-OFF
WAIT"
"AHA
SRC"
"BUILT-
IN AUX"
"CD
READ"
"SWITCH
PREOUT"
"SP
SELECT"
11. General settings
selection>.
Description
Sets the Tuner preset type.
"TYPE NORMAL": 1 station can be assigned to 1 preset button in each of 4
bands (FM1, FM2, FM3, and AM), i.e., a total of 24 stations (6 stations x 4
bands) can be preset.
"TYPE MIX": A total of 6 stations can be assigned to a total of 6 preset
buttons regardless of band (FM1, FM2, FM3, and AM). You can recall a preset
station without switching between bands.
Setting the operation check sound (beep sound) ON/OFF.
"ON" / "OFF"
When this is set to ON, the following character strings are displayed in
Russian:
Folder name/ File name/ Song title/ Artist name/ Album name
"ON" / "OFF"
Setting the timer to turn this unit's power OFF automatically when Standby
mode continues.
Using this setting can save the vehicle's battery power.
"___": Power OFF Timer function is OFF.
"20M"/ "40M"/ "60M": Turns the power OFF after minutes.
Sets whether to display aha during source selection.
"ON" / "OFF"
(Function of DPX405BT)
Sets whether to display AUX during source selection.
"ON" / "OFF"
Sets the method for reading CD.
When unable to play a special format CD, set this setting to "2" to force
playing. Note that some music CDs may be unplayable even when set to "2".
In addition, audio files cannot be played when set to "2". Normally, keep this
set to "1".
1: Automatically distinguishes between the audio file disc and music CD
when playing a disc.
2: Forces playing as a music CD.
Switches the preout between rear output and subwoofer output.
"REAR": Rear output
"SUB-W": Subwoofer output
Sets the speaker type so that the System Q value is optimal.
"OFF": OFF
"5/4": For 5 & 4 in. speaker
"6*9/6": For 6 & 6x9 in. speaker
"O.E.M.": For the OEM speaker
11-6. Initial settings
<3-3. How to select the item>.