Activating Security Code - Kenwood DPX405BT Manual

DPX405BT/DPX305U

11-4. Activating Security Code

When Security Code is set, possibility of theft is reduced because input of Security
Code is prompted to turn on the unit once it is turned off.
Security Code notes
You can set the Security Code with a 4 digit number of your choice.
The Security Code cannot be displayed or referenced. Make a note of the Security
Code and treasure it up.
1. Select the Standby source.
Refer to <Source
2. Press and hold the [AUDIO] button.
Enter the Function setting mode.
3. Use the [Control knob] to select "INITIAL SET"
For how to use the [Control knob], refer to
4. Press and hold the [Control knob].
Enter the Security Code mode.
When "ENTER" appears, "CODE" is also displayed.
5. Press the [
6. Turn the [Control knob] to Select the Security Code numbers.
7. Repeat steps 5 and 6, and complete the Security Code.
8. Check the Security Code and press and hold the[Control knob].
When "RE-ENTER" appears, "CODE" is also displayed.
9. Do the step 5 through 8 operation, and reenter the Security Code.
"APPROVED" appears.
The Security Code function activates.
Exit the Function setting mode.
Press and hold the [
Resetting the Security Code function when the audio unit is first used
after removed from the battery power source or the Reset button is
pressed.
1. Press the [SRC] button to turn the power ON.
2. Do the step 5 through 8 operation, and enter the Security Code.
"APPROVED" appears.
Now, you can use the unit.
To disable the Security Code function
To deactivate the Security Code function, see the next section
g Security
11. General settings
selection>.
] or [ ] button to select a digit to enter.
] button.
Code>.
11-4. Activating Security Code
> "SECURITY SET".
<3-3. How to select the item>.
<11-5. Deactivatin