Override; Silent Monitoring - Siemens HiPath 1100 User Manual

Step by step

OVERRIDE?

OVERRIDE
(warning)
SLNT MNTR?
qmhh
Override
The Override feature allows the user to override a con-
versation. A beep signals that the conversation in
progress has been overridden.
Required: There is a conversation in progress at the call
destination.
Select and confirm.
or
qjf
Enter the code to confirm the override.
or
Press the "OVERRIDE" key.
The called party and the caller hear a warning signal ev-
ery two seconds. If the called party is using a system
telephone with a display, it will show: "OVERRIDE:
(name or telephone number) and "RELEASE?"
s
Start conversation.

Silent monitoring

Silent monitoring allows a user to override a call without
sending a beep (for certain countries only).
Required: There is a conversation in progress at the call
destination.
Select and confirm.
or
Enter the code for silent monitoring.
p
Enter the extension (e.g., 11/101).
w s
Wait. Start monitoring.
[1] The user must have authorization from the system's support tech-
nician in order to use this feature Programming manual, Program-
ming an extension - Override).
[2] The user must have authorization to use this feature (see Program-
ming manualProgramming an extension - Silent monitoring).
Within the system, silent monitoring has the same restrictions as
the Conference and Override features.
If the monitoring or the monitored party change status, silent mon-
itoring is canceled. This occurs, for example, when a call is placed
on hold.
Functions used for making calls
1
2
33