Models Covered By This Guide; Package Contents; Selecting A Site - Allied Telesis AT-9812T V2 Quick Install Manual

Quick Install Guide
C613-04038-01 REV H

Models Covered By This Guide

This Quick Install Guide includes information on the following models:
■
AT-9812T V2
■
AT-9816GB V2

Package Contents

The following items are included with each AT-9800 Series switch. Contact
your sales representative if any items are damaged or missing.
■
One AT-9800 Series switch
■
One AC power cord (for AC models)
■
One serial cable for connecting the switch to a terminal or PC
■
One 19 inch rack-mount kit
■
One AT-9800 Series Switch Quick Install Guide
■
One AT-9800 Series Safety and Statutory Information booklet
■
One AT-9800 Series Switch Documentation and Tools CD-ROM (which
includes the complete AT-9800 Series document set and utilities)
■
One warranty card

Selecting a Site

The switch can be installed in a standard 19-inch rack or on a level surface such
as a desktop or bench. When installing the switch, choose a site that:
■
allows adequate airflow around the switch and its vents.
■
is free of dust and moisture.
will maintain an ambient temperature range of 0–40º C (32–104º F) and a
■
humidity range of 5–95% non-condensing.
■
has a reliable and earthed (grounded) power supply circuit, preferably
dedicated and filtered.
■
does not expose cabling to sources of electrical noise, such as radio
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■
allows easy access to the switch's power and cable connections.
■
will allow all related network devices to be connected to the switch
without exceeding maximum cable length limitations. See the AT-9800
Series Switch Hardware Reference for cable length specifications.
3