SMC Networks Barricade SMC7401BRA User Manual page 67

Parameter
ADSL Line State
ADSL Startup Attempts The number of times the Barricade has started training
Elapsed Time
SNR Margin
Line Attenuation
Errored Seconds
Loss of Signal
Loss of Frame
CRC Errors
Data Rate
Latency
Shows ADSL line status – Activation, Training,
Channel Analysis, Showtime, or Down.
the ADSL line for an acceptable signal rate.
Length of time this connection has been established.
Operating margin above the minimum acceptable
signal to noise ratio.
The difference in the power level received at the near
end (that is, your location) compared to that
transmitted from the head end.
Number of seconds during which signal or handshake
errors occurred. These errors occur primarily during
initial modem training.
Failure due to loss of signal at the near end.
Number of frames dropped due to signal or
handshaking errors.
Number of Ethernet Cyclic Redundancy Check errors
detected by this device.
The current data rate in use on this line.
Simultaneous transport of one or more bearer
channels, in which all user data is allocated to either the
FAST or the INTERLEAVED path.
Description
S
TATUS
3-35