OPTO 22 SNAP-PAC-R1 User Manual page 59

b. In the Device Name field, type the name (or IP address) of the device. Click Status Write.
c. In the Operation Command list, highlight Store configuration and IP settings to microSD.
d. Click Send Command.
The controller's IP settings and all configuration data are saved to the card in a file located at
/sdcard0/opto22/config/config.cfg.
3. Prepare the strategy file:
a. Open your strategy in PAC Control. In Configure mode, choose File >Strategy Options. Click
the Download tab.
b. Check the Set autorun flag after download box. Click OK.
CHAPTER 4: MAINTENANCE AND TROUBLESHOOTING
SNAP PAC R-Series Controller User's Guide
53
53