Changing The Default Volume - Nortel 1140E User Manual

44 Using the Audio menu
2
3
4

Changing the default volume

Follow this procedure to change the default volume of the handset, the
headset, or the handsfree speaker.
Step
1
2
3
4
5
6
Copyright © 2006, Nortel Networks
.
If you have permission, and you want to edit your audio profile, press
Ok or press the send key.
A list of available profiles appears.
Select the profile you want.
A check mark appears beside the selection.
Press Ok or press the send key, to save the setting.
The new profile is saved and you return to the main menu.
Action
From the main menu, select and open Audio.
The Audio menu opens.
Navigate through the menu and select Default Volumes.
A list of transducers appears.
Select the transducer to change.
Press Ok, or press the send key.
The Default Volumes menu opens.
Perform one of these actions:
• Use the right navigation key and scroll to increase the volume.
• Use the left navigation key and scroll to decrease the volume.
• For help, select Help.
Press Apply to confirm the action.
The selected volume is applied the next time that transducer is used.
Carrier VoIP
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
—End—
—End—
Nortel Networks Confidential