While on an active call
Follow these procedures to put a call on hold, transfer a call, use the mute
key, and use the conference call feature.
See
Navigation
•
•
•
•
Using call hold
The Hold feature allows you to suspend a call without terminating it. Follow
this procedure to use the hold feature.
Step
1
2
Transferring a call
Follow this procedure to transfer a call to another extension.
Copyright © 2006, Nortel Networks
.
"IP Phone 1140E components" (page 11)
"Using call hold" (page 33)
"Transferring a call" (page 33)
"Using conference call " (page 34)
"Using the mute feature" (page 35)
Action
To put the call on hold, press the hold key.
The call is suspended. On the display, an indicator flashes beside
the line on which the call is held.
Press the key beside the flashing indicator in the display.
The call is active again.
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
—End—
Carrier VoIP
for the location of the keys.
Nortel Networks Confidential
33