Using The Directory; Adding Or Editing A Directory Entry - Nortel 1140E User Manual

Using the directory

Follow procedures in this section to use the directory feature.
Navigation
•
•
•

Adding or editing a directory entry

Follow this procedure to add or edit a directory entry. See
components" (page 11)
If you are unfamiliar with how to use the dialpad to enter text, see
dialpad to enter text" (page 83)
Step
1
2
3
4
Copyright © 2006, Nortel Networks
.
"Adding or editing a directory entry" (page 71)
"Deleting an entry from the directory" (page 72)
"Making a call using the directory" (page 73)
Action
Press the directory key to access the directory.
The directory opens.
Perform one of these actions:
• If this is a new entry, press Ok or press the send key.
• If you are editing an existing entry, navigate through the list to
select the entry, then press Ok or press the send key.
The Directory menu opens.
From the Directory menu, select and open New Entry.
The New Entry menu opens.
To add or edit the number, perform these steps:
a. From the New Entry menu, select and open Number.
b. Use the dialpad to enter the number.
c. Press Ok, or press the send key.
Nortel IP Phone 1140E User Guide
NN10300-023 01.02 Standard
(I)SN09U 20 October 2006
for the location of the directory key.
before you begin this procedure.
Carrier VoIP
71
"IP Phone 1140E
"Using the
Nortel Networks Confidential