Battery Disposal - Dell LATITUDE X200 PP03S System Information Manual

Information Technology Equipment (ITE), including devices, expansion
cards, printers, input/output (I/O) devices, monitors, and so on, that are
integrated into or connected to the computer should match the
electromagnetic environment classification of the computer.
A Notice About Shielded Signal Cables: Use only shielded cables for
connecting devices to any Dell device to reduce the possibility of
interference with radio communications services. Using shielded cables
ensures that you maintain the appropriate EMC classification for the
intended environment. For parallel printers, a cable is available from Dell.
If you prefer, you can order a cable from Dell on the World Wide Web at
accessories.us.dell.com/sna/segmenter/asp.
Most Dell computers are classified for Class B environments. However, the
inclusion of certain options can change the rating of some configurations to
Class A. To determine the electromagnetic classification for your computer
or device, refer to the following sections specific for each regulatory agency.
Each section provides country-specific EMC/EMI or product safety
information.

Battery Disposal

Your computer uses a lithium-ion battery and a nickel-metal hydride
(NiMH) coin-cell battery. For instructions about replacing the lithium-ion
battery in your computer, see "Removing a Battery" and "Installing a
Battery" in your System Information Guide. The NiMH battery is a long-life
battery, and it is very possible that you will never need to replace it.
However, should you need to replace it, the procedure must be performed
by an authorized service technician.
Do not dispose of the battery along with household waste. Contact your
local waste disposal agency for the address of the nearest battery deposit
site.
26
D e l l™ L a t it u d e™ X 20 0 S y s t e m I n f o r ma ti o n G u i d e