Changing The Filter - Jura IMPRESSA J9 One Touch Instructions For Use Manual

5 Maintenance

Changing the filter

38
E
After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E
After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the filter
holder in the water tank.
E
If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
Precondition:
COFFEE READY
played and the Maintenance button c lights up.
c T Press the Maintenance button.
DURATION 2 MIN.
E
If you do not want to start changing the filter just yet, turn the
Rotary Switch until
Switch to exit the maintenance programme. The prompt to
'change the filter' remains active.
c T Press the Maintenance button.
CHANGE FILTER
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and extension piece.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
E
If you are using the
the selector switch to the Steam position n.
c T Press the Maintenance button.
FILTER RINSING
frother.
/
CHANGE FILTER
/
START YES
is displayed. Press the Rotary
START NO
/
PRESS RINSE
Professional Cappuccino Frother, turn
, water flows out of the cappuccino
is dis-