Using And Activating Filter - Jura IMPRESSA C5 Manual

Using and activating
filter
Your IMPRESSA no longer has to be descaled if you are using CLARIS
filter cartridges.
Perform the 'Using filter' operation without a break. This will
o
ensure that your IMPRESSA always produces its best.
@
You can also try out the 'Using filter' operation online. Visit the
Knowledge Builder on www.jura.com.
Remove the packaging on the CLARIS filter cartridge.
l
Remove the water tank and empty it.
l
Lift the cartridge holder and insert the filter cartridge into
l
the water tank, applying a light pressure.
Close the cartridge holder. It will lock into place audibly.
l
Fill the water tank with cold, fresh mains water and rein-
l
sert.
After two months, the filter will cease to work. Monitor the
o
elapsed time as shown on the date plate on the cartridge
holder.
Precondition: your IMPRESSA is ready for use.
Open the access door.
l
Turn the Rotary Switch so that it points to the P symbol
ä l
Press the Rotary Switch.
m l
The cleaning, descaling and filter indicators light up.
Hold down the Filter button until the Filter indicator
n l
lights up.
Turn the Rotary Switch until the 3 light segments around the
ä l
Rotary Switch light up.
When the 3 light segments light up, the filter is activated. If
o
none of the light segments light up, this means that the filter
has not been activated.
Press the Rotary Switch to confirm the setting.
m l
The light segment by the switch will now flash.
2 Preparing and using your IMPRESSA for the first time
P
.
n
13