Miscellaneous Errors; List Of Miscellaneous Malfunctions - Konica Minolta PagePro 1380 MF Service Manual

5.

Miscellaneous Errors

5-1.

List of Miscellaneous Malfunctions

Message on
the Display
• When the Home Sensor remains High (5 V) even after the lapse of
Unlock scanner
• When the gray level value can't reach 10 (0 to 255) even after the
[Scanner Error]
Lamp Error • When the gray level value can't reach 35 (0 to 255) even after the
• The firmware writes a pattern to all AFE registers and reads the val-
[Scanner Error]
AFE R/W Error
• When the scanning job is finished, the Scanner Unit travels 14
[Scanner Error]
Home Sensor
• When scanning a job, the firmware calculates the distance that the
[Scanner Error]
Motor Stall
[Printer Error] • The Toner Cartridge is not a genuine KONICA MINOLTA Toner Car-
Incorrect Toner
[Printer Error] • A Toner IC Read Fail has occurred.
IC Read Fail
[Printer Error] • A Toner IC Write Fail occurred.
IC Write Fail
a predetermined period of time after the Scanner Motor is turned
ON, an unlock scanner error occurs.
lapse of a predetermined period of time after the warmup.
lapse of a predetermined period of time after the warmup.
ues back. If there is any difference between the write/read values,
an AFE R/W Error occurs.
inches back to the home position. After the Scanner Unit has
moved 14 inches, if the Home Sensor can't be pressed, a Home
Sensor error occurs.
Scanner Unit has travelled. If the distance between the home posi-
tion and the scan stopped position is different than the distance
between the scan stopped position and the home position, a Motor
Stall error occurs.
tridge or not the correct type.
T-18
Description