Removing The Magnetron Thermal Fuse - KitchenAid KHMS105E Service Manual

REMOVING THE MAGNETRON THERMAL FUSE

WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
Discharge the high voltage capacitor be-
fore working inside the oven. Failure to do
so could result in death or electrical shock.
1. Disconnect the electrical supply to the
microwave oven.
2. Remove the two screws from the top of
the cabinet for the vent grille and remove
THE MAGNETRON THERMAL FUSE
OPENS @ 302˚F AND RESETS @ 140˚F.
3.
4.
5.
6.
7.
MAGNETRON
MAGNETRON
THERMAL
FUSE
BLACK WIRE
BLACK & RED
WIRES
FAN COVER
2-12
the grille (see the illustration on page
2-3).
Remove the control panel from the micro-
wave oven (see page 2-6).
Remove the center screw from the fan
cover and fold the cover back so you can
access the magnetron thermal fuse.
Unplug the wire connectors from the mag-
netron thermal fuse on the side of the
magnetron.
Remove the two screws from the magne-
tron thermal fuse and remove it.
Mount the new magnetron thermal fuse to
the magnetron and then reassemble the
microwave oven.
COVER
SCREW
FOLD
BACK