REMOVING THE CONTROL PANEL
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
Disconnect the electrical supply to the
TURN PANEL OVER
Remove the two screws from the top of
the cabinet for the vent grille and remove
the grille (see the illustration on page
Remove the screw from the top center tab
of the control panel.
From the top and back of the control
panel, lift the top locking tab and pull
the top of the panel out slightly, then lift
the bottom tabs of the panel out of the
slots and pull it forward. Turn the panel
over out of the way.