Dsc Operation; I Mmsi Code Programming; I Dsc Address Id - Icom IC-M604 Instruction Manual

6

DSC OPERATION

I MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only twice.
q While pushing and holding [MENU], push [POWER] to
enter MMSI code programming condition.
• Turn power OFF in advance.
w After the display appears, release [MENU].
e Enter "
 
(Push [MENU])
r Edit the specific MMSI code directly with the keypad.
• Rotate [SELECTOR] to move the cursor backward or forward.
t After entering the 9-digit code, push [ENT] to set the code.
• Returns to the DSC set up menu.
y Push [CLR] or rotate [SELECTOR] to select "
push [ENT] to return to DSC menu.
• Repeat again to return to the normal operation condition.
16
" in DSC Set up menu.
➪ ➪
  
(Rotate [SELECTOR], then push [ENT].)

I DSC address ID

A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D D Programming Individual ID
q Enter "

(Push [MENU])
w Set the individual ID and ID name directly with the keypad.
• Edit the 9-digits of the appropriate distress ID directly with the
keypad.

• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the ID and name.
• Push [CLR] to cancel and exit the condition.
e Push [ENT] to program and return to the DSC set up
menu.
r Push [CLR] or rotate [SELECTOR] to select "
push [ENT] to return to DSC menu.
,"
• Repeat again to return to the normal operation condition.
" in DSC Set up menu.
➪ ➪
   
(Rotate [SELECTOR], then push [ENT].)

,"