Using Your Answering System - Uniden DSS7855 Owner's Manual

Using Your Answering System

The message counter displays the number of messages stored in
memory. If the display flashes, then there are new messages waiting
for you. The answering system is designed to play your new
messages first. After you play all your new messages, you can then
play your old messages.
! The time stamp
will not be heard
Playing your messages
until you have set
1) When the base is in standby mode, press
the time.
The system announces the number of new and old messages while the message counter displays
only the number of new messages. The time and day that each message was received is announced
after the message is played. The message counter will then display the number of currently stored
messages.
2) When all new messages have been played, you hear a confirmation tone, and the system
announces "End of messages." The system returns to standby. After you have reviewed your new
messages, you can play your old messages by pressing
listened to a new message, it then becomes an old message. The old messages will be played in the
order in which they were received.
Repeating a message
1) Press play/ stop
2) To repeat the current message, press the
To quickly scroll backwards through a message, press and hold the
previous message, press the
operation) after a message begins playing. If you have several messages, press the
repeatedly until you return to the message you want to replay. If the current message is the first new
message, the system plays back from the beginning of the current message. The system will not go
back into the old message group until all new messages have been heard.
3) Press play/ stop
counter shows the number of messages stored in memory.
play/ stop .
play/ stop
to review your messages. The number of stored messages is announced.
|<< soft key after a few seconds of beginning the message.
|<< soft key within a few seconds (about four seconds during remote
at any time to stop reviewing messages and return to standby. The message
[55]
again. Once you have
|<< soft key. To repeat the
|<< soft key