Turning The Answering System On/Off; Setting Your Outgoing Message (Greeting) - Uniden DSS7855 Owner's Manual

Turning the Answering System On/Off

1) To turn the answering system on, press
the base when the phone is in standby mode or use remote
function from any handset (see Remote access with the
handset P. 59).
! When the
messages stored in memory appear on the LCD. If the LCD
answering system
flashes, then there are new messages waiting for you.
is full, you will
hear "No
2) To turn the answering system off, press
Remaining Time"
Appears on the LCD.
ANSWR
and OFF
FULL
appears on the

Setting Your Outgoing Message (Greeting)

LCD. You should
delete some When you receive a call, the answering system automatically plays either the pre-recorded
messages
message or your own greeting. To record your own greeting, or choose between the two
so that the system
outgoing messages, refer to "Answering System Setup" on page 21. The following message
can record new
is pre-recorded: "Hello, no one is available to take your call. Please leave a message after
messages.
the tone."
Announce only feature
The announce only feature plays a pre-recorded outgoing message or your own personal
outgoing message, but it will not allow the caller to leave a message.
To set announce only, follow the steps on "Setting the Record Time" on page 23. If you want
to use your own greeting and you want to change your greeting to omit the prompt to leave
a message, refer to "Selecting Your Greeting (Base only)"on page 22. The following
message is pre- recorded: "Hello, no one is available to take your call. Please call again."
answer on/off
and the number of
Message
answer on/off
[53]
on
on the base.