Emergency Stop Key (E-Stop) - CYBEX PRO3 Owner's Manual

Emergency Stop Key (e-stop)

The e-stop key functions as the emergency stop. In an emergency situation, remove the e-stop key and
the treadmill will come to a stop. Before using the treadmill, clip the e-stop key as described below.
1. Clip the e-stop key to your clothing. NOTE: Be sure the string is free of knots and has enough slack
for you to run comfortably with the e-stop key in place.
2. Without falling off the treadmill, carefully step backward until the e-stop falls off the treadmill. NOTE: If
the e-stop clip falls off your clothing then the test has failed. Reclip the e-stop clip to your clothing and
repeat this step.
3. Replace e-stop after successfully testing the e-stop key. See the illustration shown below.
4. The treadmill is now ready to be used.
5. After use, remove the e-stop key from the treadmill.
NOTE: The e-stop key shall be removed to help prevent unauthorized use. Refer to the Stopping the
Treadmill section in the Operation chapter for more information about the e-stop key.
Safety
Page 1-8
Cybex Pro Treadmill Owner's Manual
3