Volume Control - Universal Electronics Nevo C3 User Manual

Volume Control

The Volume Control feature allows you to set one device to control the volume all the time, no matter
which device the remote is currently controlling. For example, if you always watch TV using your AV
Receiver, you would not want to alter the Television's volume when you watch TV. In this case, you can set
Nevo to always control the AV Receiver's volume, even when in TV Mode.
In the Volume Control section you will be given the option to set the Master Volume device, to remove a
device from this group (allowing it to use its own volume), or to unlock the Volume completely, allowing
the remote to control each device's volume individually.
➭ Locking Volume to a device
1) Select "Volume Control" from the Settings menu.
2) Review the explanatory screens, then click "OK".
3) Select "Lock Volume". The first page of devices is displayed.
Note:
4) Select the device you want to lock volume to. The remote will display a confirmation screen.
5) Click "Finish".
➭ Removing a Device from Lock
1) Select "Volume Control" from the Settings menu.
2) Review the explanatory screens, then click "OK".
3) Select "Unlock Device". The remote displays a confirmation screen and then removes
the volume lock.
4) Click "Finish".
➭ Unlocking All Volume
1) Select "Volume Control" from the Settings menu.
2) Review the explanatory screens, then click "OK".
3) Select "Unlock All". The remote displays a confirmation screen and then unlocks the volume.
4) Click "Finish".
14
Settings
www.mynevo.com