Timeout; Language; Rf On/Off - Universal Electronics Nevo C3 User Manual

Timeout

To save battery power, the key backlight and LCD screen will automatically dim after a period of inactivity.
The default period is 10 seconds. You can view and adjust the timing of this under the Timeout setting:
1) Select "Timeout" from the Settings menu.
2) The screen will change to display the current timeout length. The minimum timeout is 5 seconds
and the maximum timeout is 30 seconds. To change the timeout, press " + " or " - ". The screen
will change to display the new timeout length.
Note:

Language

This setting will allow you to change the Language that your remote displays. All menus and instructions
will be displayed in the selected language.
RF On/Off (NevoC3 only)
Your NevoC3 not only outputs Infrared (IR), but also Radio Frequency (RF). This means it is compatible
with the separately available Nevo REX-433 RF Extender, allowing you to control your devices even if they
are hidden in a closed cabinet.
However if you do not own this accessory, you have the option to turn off the RF Transmission.
1) Select "RF On/Off" from the Settings menu. NevoC3 displays the current RF Transmission status.
2) Select an RF status: "ON" or "OFF" to turn RF transmission ON or OFF.
3) Select "OK" The remote will save the RF Transmission status.
16
Settings
www.mynevo.com