Table of Contents
Advertisement
Generic Pioneer Charter OCAP.fm Page 16 Friday, July 20, 2007 1:28 PM
DVD, TV or CBL mode. You can perform Individual
Volume Unlock on a selected device to set its volume
control for independent operation.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1.
Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g., CBL) and press it once. Next,
press and hold SET UP until the device key
blinks twice.
2.
Enter 9 9 3. The last-selected device key
blinks twice.
3.
Press VOL- once. The last-selected device key
blinks four times.
4.
Repeat steps 1 through 3 for each device you
want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., CBL), pressing VOL+, VOL-,or MUTE, controls only
that device's volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE:
Performing these instructions sets indepen-
dent volume control for all programmed
devices.
1.
On the remote control, press and hold SET UP
until the last-selected device key blinks twice.
2.
Enter 9 9 3. The last-selected device key
blinks twice.
3.
Press VOL+ once. The last-selected device key
blinks four times.
www.urcsupport.com
16
Hide quick links:
Advertisement
Table of Contents
