Rt (Radio Text); Ipod ® Playback; Basic Operation - Denon AVR-2308 Owner's Manual

RT (Radio Text)

"RT" appears on the display when radio text data is
received.
1
<SOURCE SELECT>
Either turn or press
select "TUNER".
2
[MODE SELECTOR 1]
Set to "AUDIO".
(vpage 51 "Remote Control Unit Operations")
3
<RT>
Press .
b While receiving an RDS broadcast station, the text data broadcast
from the station is displayed.
b To turn the display off, press <RT>.
b If no text data is being broadcast, "NO TEXT DATA" is displayed.
iPod ® Playback
The music on an iPod can be played by using the Control Dock for
iPod (ASD-1R, sold separately).
The operation can also be performed using the buttons on the main
unit or remote control unit while watching the menus.
[TUNER]
to
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.

Basic Operation

1
Make the necessary preparations.
q S et the iPod in the DENON Control Dock for iPod.
(vSee the Control Dock for iPod's operating instructions.)
w Assign the Control Dock for iPod's input.
MENU : "Input Setup" – "Assign" – "iPod dock"
(vpage 35)
2
<SOURCE SELECT>
Either turn
select the input source assigned in step 1-w above.
b
If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
3
[MODE SELECTOR 1]
Set
SELECTOR 2]
to "iPod/NETWORK".
(vpage 51 "Remote Control Unit Operations")
• With the default settings, the iPod can be used connected to the VCR
• Use the RESTORER mode to expand the low and high frequency
• Press <ON/STANDBY> and set the AVR-2308's power to the standby
• Depending on the type of iPod and the software version, some
• DENON will accept no responsibility whatsoever for any loss of iPod
[iPod]
or press to
OK to disconnect.
(iPod screen)
[MODE
to "AUDIO" and
(iPod) connector.
components of compressed audio fi les and achieve a richer sound.
The default setting is "Mode3" .
mode before disconnecting the iPod. Also switch the input source
to one to which the menu "iPod dock" is not assigned before
disconnecting the iPod.
NOTE
functions may not operate.
data.
ENGLISH