Rt (Radio Text); Listening To Dab Stations; Tuning In Dab Stations; Presetting The Currently Tuned In Station - Denon DRA-F102 DAB Operating Instructions Manual

Operation

RT (Radio Text)

[ TIME/DISPLAY ]
Press until "Radio Text" scrolls on the
display.
When the station currently tuned in is offering a radio text
message service, the message scrolls on the display.
• When the RT mode is turned on while an RDS radio station not
offering an RT service is tuned in, "NO TEXT" is displayed on the
display, then the mode automatically switches to the PS mode.
• In the same way, the mode automatically switches to the PS mode
when the RT service is finished. In this case, the mode automatically
switches from the PS mode back to the RT mode when an RT
broadcast is resumed.
• The RT mode cannot be set in the AM band or for FM stations not
offering RDS broadcasts.
• To turn the RT mode off, use [TIME/DISPLAY] and switch to the
desired display mode.

Listening to DAB stations

Tuning in DAB stations

1
FUNCTION
Use to select "TUNER".
• The reception frequency is displayed.
2
BAND
Use to select "DAB".
DAB FM AUTO
AM
FM MONO
3
MENU/SET
Press and hold .
• The DAB menu is displayed.
4
[ ] [ ]
Use 8 or 9 to select "AUTO SCAN", then
MENU/SET
press .
• The first time this operation is performed, the set automatically
starts scanning the radio stations.
Once auto scanning is completed, the number of stations is
displayed and the first station is tuned in.
5
TUNING
Use to select the desired broadcast station.
The broadcast stations are displayed in the order in which they
were scanned.
The [DAB/RDS] can be used to resort the stations in alphabetical
order.
¢ To select the auto scan range:
qPress MENU/SET and hold it in for at least 2 seconds while in the
standby mode.
"DAB SCAN AREA" is displayed.
wUse [
8 ] and [ 9 ] to select the auto scan range. (ALL BAND
5A to 13F, UK ONLY: 11B to 12D)
¢ To delete the auto scanned stations:
"DAB SCAN AREA" is displayed.
At step 4 select "DAB INITIALIZE".
• If "NO STATION" is displayed when auto scanning finishes, check
the antenna's connection ( page 9).
15

Presetting the currently tuned in station

Up to 60 DAB stations can be preset.
1
1 5
Perform steps to under "Tuning in DAB stations"
to tune in the station you want to preset.
2
[ENTER/MEMO]
Press .
• The preset number display flashes.
3
[ ] [ ]
Use the 8 or 9
which the station is to be preset, then press the
[ENTER/MEMO]
.
¢ To call out a preset station:
Press [8] or [9].
III
:
Operation
to select the number at