Rds Search; Pty Search; Tp Search - Denon AVR-2308 Owner's Manual

ENGLISH
<SOURCE SELECT>
<ON/STANDBY>
PRESET CHANNEL
[Front]
[MODE
SELECTOR 1]
[Rear]
[iPod]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


RDS Search

<PTY> <RT>
Use this function to automatically tune to FM stations that
provide the RDS service.
1
Either turn
select "TUNER".
2
[MODE SELECTOR 1]
Set
(vpage 51 "Remote Control Unit Operations")
3
<RDS>
Press
<RDS>
display.
4
PRESET CHANNEL
Press
The search for RDS stations begins automatically.
b If no RDS stations are found with the above operation, all the
PRESET
reception bands are searched.
CHANNEL
b When a broadcast station is found, that station's name appears on
the display.
5
To continue searching, repeat steps 2 to 3.
b If no RDS station is found when all the frequencies have been
searched, "NO RDS" is displayed.

PTY Search

Use this function to find RDS stations broadcasting a
[MODE
designated program type (PTY).
SELECTOR 2]
For a description of each program type, refer to "Program
Type (PTY)" .
1
Either turn
[TUNER]
select "TUNER".
2
[MODE SELECTOR 1]
Set
(vpage 51 "Remote Control Unit Operations")
3
<RDS>
Press
display.
<SOURCE SELECT> [TUNER]
or press
to "AUDIO".
until "RDS SEARCH" appears on the
.
<SOURCE SELECT> [TUNER]
or press
to "AUDIO".
until "PTY SEARCH" appears on the
4
Watching the display, press
desired program type.
5
PRESET CHANNEL
Press .
to
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
6
To continue searching, repeat steps 2 to 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, "NO PROGRAMME"
is displayed.

TP Search

Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
<SOURCE SELECT>
Either turn
select "TUNER".
2
[MODE SELECTOR 1]
Set to "AUDIO".
(vpage 51 "Remote Control Unit Operations")
3
<RDS>
Press until "TP SEARCH" appears on the
display.
4
PRESET CHANNEL
Press .
TP search begins automatically.
to
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAMME" is displayed.
<PTY>
to call out the
[TUNER]
or press to