Record Player
• When connecting a record player with an MC cartridge, use a commercially available MC head amplifier
or a step-up transformer.
• Induction humming (a booming sound) may be produced from the speakers if the volume is raised with
no record player connected.
• With some record players, noise may be generated when the ground wire is connected. If so, disconnect
the ground wire.
NOTE
The AVR-2308's SIGNAL GND terminal is meant to reduce noise when a record player is connected. This
is not a safety ground terminal.
Turntable (MM cartridge)
L
R
CD Player
Connect the cables to be used.
When using an optical cable for the digital audio connection, make the settings at menu "Input Setup"
– "Assign" – "Digital In" (vpage 35).
ENGLISH
CD player
L
R
L
R