Option Setup; Amp Assign; Volume Control; Source Delete - Denon AVR-2308 Owner's Manual

ENGLISH

Option Setup

Make various other settings.
F Menu screen F
2.Manual Setup
2-5.Option Setup
1.Speaker Setup

1.Amp Assign

2.HDMI Setup
2.Vol.Control
3.Audio Setup

3.Source Delete

4.Zone2 Setup
4.On-Screen Display
5.Option Setup
5.Quick Select Name
6.Trigger Out
7.Remote ID Setup
8.2Way Remote
9.Display
10.Setup Lock
Amp Assign
a
Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the main zone) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch ZONE2 FrontA Bi-Amp
For details, see "Amp Assign / Multi-zone Connections and Operations"
(vpage 55 ~ 57).
0
s Volume Control
Set the main zone volume setting.
Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
Power On Level
This sets the volume set when the main zone's power is turned on.
[Selectable items]
Last
– – –
–80dB ~ +18dB
FrontB Bi-Amp 2ch
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the main zone.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
: Use the memorized setting from the last session.
: Always use the muting on condition when power
is turned on.
: Set the volume level when the power is turned on
in units of 1 dB.
d Source Delete
Remove input sources that are not used from the display.
[Selectable items]
ON
: Use this source.
Delete
: Do not use this source.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using the SOURCE
SELECT knob on the main unit or SOURCE SELECT button on the remote
control unit.