Amp Assign / Multi-Zone Connections And Operations; Multi-Zone Settings With The Amp Assign Function - Denon AVR-4308 Owner's Manual

Amp Assign / Multi-Zone Connections and
Operations
The AVR-4308 is compatible with the following types of playback:
• Multi-zone playback (ZONE2 & ZONE3)
• Bi-amp playback (front speaker)
• Bi-wiring playback (front speaker)
NOTE
• For bi-amp and bi-wiring playback, use speakers compatible with that type of connection.
• When conducting bi-amp or bi-wiring playback, remove the short-circuiting boards (or wires) from the
speaker terminals.
Multi-Zone Settings with the Amp Assign Function
The amp assign function lets you assign the amplifiers for the different channels built into the AVR-4308 to
the speaker outputs for the different zones.
Select the desired playback environment from among "Setting 2" to "Setting 7" , then set the corresponding
"Amp Assign" mode at GUI menu "Manual Setup" – "Option Setup" – "Amp Assign" (vpage 36).
Connect the speakers as described at "Amp Assign mode settings and speakers connected to the various
speaker terminals" .
With "Setting 5" to "Setting 7" , it is possible to switch the Amp Assign mode between the 7 .1-channel
mode and the multizone mode without changing the speaker connections.
Setting 1:
7 .1-channel playback
F
Main zone
FL SW C FR
Amp Assign mode:
7 .1ch
SL SR
7 .1CH (Default)
A A
B B
SBL SBR
n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
FRONT
CENTER
R L
Amp Assign mode
7 .1CH FR FL C
SURR. SURR-B/ AMP ASSIGN -
SURR-A
BACK AMP ASSIGN
R L R L R L
SR-A SL -A SBR SBL SR-B SL -B
ENGLISH
2
R L
– –