Nokia MEDIAMASTER 9800 S Owner's Manual page 35

MAIN MENU
When your antenna is controlled by a motor:
• Enter the "Channel Search" menu.
• Select "Manual" or "Advanced" search.
• Select the new satellite name.
• Enter the settings for Transponder frequency, Polarization etc.
for the new satellite.
• Select the last line, "Adjust Motor", from where you now, by
pressing the buttons on the remote control, can move the an-
tenna to the position for the new satellite.
Alternate between the Signal Strength (AGC) and Signal Qual-
ity (SNR) bar indications to check the levels. Please note: In
this case, (a brand-new satellite), you do not get a TV picture
in the background on the screen, even when the SNR indica-
tion is good! When both indication bars (AGC and SNR) are
good:
• Press OK to start the channel search procedure in order to
download channels from the new satellite.
• When you get the message on the screen that "you have
found X new TV-channels and X new radio channels", press
OK to save the new channels.
The new channels will be saved in the box and added to the "All
TV" and "Free TV" lists.
The position of the new satellite will be added to the prepro-
grammed satellite positions in the antenna motor.
View attributes
Chech position and orientation for different satellites by select-
ing the line "View Attributes".
Delete Satellite
You can also delete an added satellite. (This is not possible for the
factory preprogrammed satellites.)
If you want to delete the satellite from which you right now are
watching a channel, you will get a screen message about how
to proceed.
When you delete a satellite you also delete the channels belong-
ing to it (from the "All TV" and "Free TV" lists.)
GB 35