Lvds Inverter Connector (Cn10); Cf Connector (Cn11) - AXIOMTEK SHB111 User Manual

LVDS Inverter Connector (CN10)

The 7-pin inverter connector on the SHB111 is with Hirose connector.
The matching connector is strongly recommended to use Hirose
DF13-7S-1.25C.
Pin
1 12V
2 12V
3 5V
4 ENABLE
5 GND
6 GND
7 GND

CF Connector (CN11)

The board is equipped with a CompactFlash
solder side to support an IDE2 interface CompactFlash
The socket is especially designed to avoid incorrect installation of the
TM
CompactFlash disk card. When installing or removing the
TM
CompactFlash disk card, please make sure the system power is off.
TM
The CompactFlash
your PC system.
Pin
1 GND
2 Data 3
3 Data 4
4 Data 5
5 Data 6
6 Data 7
7 CS0#
8 Address 10
9 ATASEL
10 Address 9
11 Address 8
12 Address 7
13 VCC
Jumpers and Connectors
SHB111 Arrandale Full-Size SBC User's Manual
Signal
disk card is defaulted as the C: or D: disk drive in
Signal Pin
26 CD1-
27 Data 11
28 Data 12
29 Data 13
30 Data 14
31 Data 15
32 CS1#
33 VS1#
34 IORD#
35 IOWR#
36 WE#
37 INTR
38 VCC
TM
disk socket on the
TM
disk card.
Signal
19