Other Functions; Dtmf Pager/Code Squelch - Icom IC-F31GT Instruction Manual

7

' ' DTMF PAGER/CODE SQUELCH

D D DTMF pager
This function uses DTMF tones for calling and can be used as a
"common pager" to inform you that one of your group has called
even if the operator is temporarily away from the transceiver.
• When the connection code is received, a beep sounds, then "
flashes and shows the called station's code number.
• The called station's code number is memorised automatically, and
is easy to re-call with "ID-MR select function".
D D Code squelch
This conveniently eliminates unwanted audio and is useful in
group activities or security related activities where unwanted out-
put can be a problem. The function is similar to a CTCSS tone
squelch.
In order to use the above functions, cloning is necessary via a
PC using the optional CS-F30G
software, the transceiver's model, individual RX Code CH, TX
Code CH, Special Tone Link2 (must be 'E') in 5Tone screen,
5Tone Signaling Form in Memory-CH screen, Log, RX C-No,
Key&Display, Common Auto Reset Timer B, and other settings
related to operation can be set. Refer to the HELP file that comes
with the CS-F30G
22

OTHER FUNCTIONS

CLONING SOFTWARE
CLONING SOFTWARE
for available settings.
"
. Using this