Icom IC-F31GT Instruction Manual page 24

6
SmarTrunk II
D D Last number redial*
Push [M], [M] to automatically redial the last number called.
• A high-pitched beep indicates that the number is accepted.
D D Turbo SpeeDial
To automatically dial a commonly used number with one push:
• Push one of the turbo SpeeDial keys.
D D Programming memory speed dial
q Push and hold [M] until you hear a high-pitched beep.
w Enter the memory location (0–9, A, B, C, D), the telephone or
subscriber number, then [1], [M] (or [3], [M] if for another sys-
tem subscriber).
• A high-pitched beep indicates successful programming.
• Memories [A]–[D] are used for the Turbo SpeeDial.
NOTE: This function is available for the IC-F31GT/IC-F41GT
D D Memory speed-dialling*
To automatically dial a commonly used number from memory:
• Push [M] followed by the memory location (0–9).
D D Clear channel alerting*
If all channels are busy, the transceiver automatically begins
searching for an open channel and beeps every ten seconds.
When two short beeps (low-pitched, then high-pitched) are
heard, a channel is available. Push [M], [M] immediately to redial
the last number.
D D Emergency call*
Push [0], [M] to initiate an emergency call.
• Contact your Dealer for details.
20
TM OPERATION
1
only.
2
1
2