Setting The Anti-Theft Function; Setting The Password; Entering The Password; Deleting The Password - Pioneer AVIC-Z150BH Operation Manual

Other functions

Setting the anti-theft function

You can set a password for the navigation sys-
tem. If the back-up lead is cut after the pass-
word is set, the navigation system prompts for
the password at the time of next boot up.

Setting the password

Display the "System Settings" screen.
1
= For details, refer to Displaying the screen for
system settings on page 144.
2 Touch Area1, followed by Area2, and
then touch and hold Area3.
Area1 Area2
3 Touch [Set Password].
The password setting screen appears.
4 Enter the password you want to set.
p 5 to 16 characters can be entered for a
password.
5 Touch [OK].
6 Enter a password hint.
p Up to 24 characters can be entered for a
hint.
7 Touch [OK].
The Password Confirmation screen ap-
pears.
p If you want to change the password cur-
rently set, enter the current password and
then enter the new one.
8 Check the password, and then touch
.

Entering the password

On the password input screen, you must enter
the current password.
1
2
If you enter the correct password, the naviga-
tion system will be unlocked.

Deleting the password

The current password can be deleted.
1
= For details, refer to Displaying the screen for
Area3
2
then touch and hold Area3.
3
A message confirming whether to delete the
password appears.
4
The password setting screen appears.
A message confirming a password hint ap-
pears.
5
6
7

Forgotten password

Contact the nearest authorized Pioneer Ser-
vice Station.
Enter the password.
Touch [OK].
Display the "System Settings" screen.
system settings on page 144.
Touch Area1, followed by Area2, and
Touch [Clear password].
Touch [Yes].
Touch [OK].
Enter the current password.
Touch [OK].
Chapter
28
163
En