Adjusting Loudness; Using The Equalizer - Pioneer AVIC-Z150BH Operation Manual

Customizing preferences
= For details, refer to Setting the rear output
on page 158.
3 Touch or to adjust front/rear
speaker balance.
Each time you touch
speaker balance moves towards the front or
rear.
Front 15 to Rear 15 is displayed as the
front/rear speaker balance moves from the
front to rear.
Set Front and Rear to 0 when using a
dual speaker system.
4 Touch or to adjust the left/right
speaker balance.
Each time you touch
speaker balance moves towards the left or
right.
Left 15 to Right 15 is displayed as the left/
right speaker balance moves from left to right.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volumes.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
2 Touch [Loudness].
3 Touch [On].
# If you touch [Off], the setting is turned off.
4 Touch or , and select the level
you want to set.
Low Mid High
or , the front/rear
or , the left/right

Using the equalizer

The equalizer lets you adjust equalization to
match the vehicle interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves that
you can easily recall at any time. Here is a list
of the equalizer curves:
Equalizer curve
S.Bass (Super Bass) is a curve in which only low-
pitched sound is boosted.
Powerful is a curve in which low- and high-pitched
sounds are boosted.
Natural is a curve in which low- and high-pitched
sounds are slightly boosted.
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat is a flat curve in which nothing is boosted.
Custom1 is an adjusted equalizer curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2 is an adjusted equalizer curve that you cre-
ate. If you select this curve, the effect is reflected all
AV source.
p When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
p You cannot select Custom1 and Cus-
tom2 when Auto EQ is On .
= For details, refer to Using the auto-ad-
justed equalizer on page 153.
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 150.
Chapter
27
151
En